The U.S. Department of Energy’s (DOE) Hydrogen and Fuel Cell Technologies Office (HFTO) seeks input on priority areas that will advance domestic manufacturing and recycling of clean hydrogen technologies, including fuel cells, storage equipment, and other hydrogen related components as specified below; and on priority areas that will advance electrolyzer technologies for affordable clean hydrogen production, in alignment with the Bipartisan Infrastructure Law (BIL) and the mission of DOE’s Hydrogen Energy Earthshot to reach the goal of $1 per 1 kilogram in 1 decade (“1 1 1”). This Request for Information (RFI) was developed in coordination with the Advanced Manufacturing Office. This RFI is issued to obtain feedback on the status of and opportunities for technologies that support goals in BIL section 40314, amending the Energy Policy Act of 2005 (EPACT). The BIL added a new section 815 on clean hydrogen manufacturing and recycling research, development, and demonstration (RD&D) and a new section 816 for the establishment of the Clean Hydrogen Electrolysis Program to EPACT. The EPACT Sec. 815 activities are grouped into a Clean Hydrogen Manufacturing Initiative (815a) focused on enhancing domestic manufacturing of clean hydrogen use, storage, and related equipment and a Clean Hydrogen Technology Recycling RD&D Program (815b) that covers recycling of equipment for clean hydrogen processing, delivery, storage, and use, including fuel cells. The Clean Hydrogen Electrolysis Program in section 816 expands on DOE’s existing, comprehensive Program on electrolysis and is a research, development, demonstration, commercialization, and deployment program aimed at improving efficiency, increasing durability, and reducing capital costs of electrolyzers, thus facilitating the commercialization of clean hydrogen electrolyzer technology.
DOE does not intend to publish information collected through this RFI; input will be used to develop and refine the programs.
Responses to this RFI must be submitted electronically to H2RFI@ee.doe.gov no later than 5:00 p.m. (ET) on March 29th, 2022. If possible, please copy and paste the RFI questions and use them as a template for your response. Responses must be provided as attachments to an email. It is recommended that attachments with file sizes exceeding 25 MB be compressed (i.e., zipped) to ensure message delivery. Responses must be provided as a Microsoft Word (*.docx) or Adobe Acrobat (*.pdf) attachment to the email. Only electronic responses will be accepted. Respondents may answer as many or as few questions as they wish.
Respondents are requested to provide the following information at the start of their response to this RFI:
- Company / institution name
- Company / institution contact
- Contact's address, phone number, and e-mail address
DOE will not respond to individual submissions or publicly publish a compendium of responses. A response to this RFI will not be viewed as a binding commitment to develop or pursue the project or ideas discussed.