{"text_format":"2","workbook":"xlsx","n_sheets":3,"sheets":["Topic Area 2 Application Data","Topic Area 1 Application Data","Block Flow if Applicable"],"not_rendered":{"charts":0,"images":0,"macros":0,"external_links":0,"defined_names":0,"comments":0,"pivot_tables":0},"unopened":[],"bounds":{"document_bytes":16777216,"sheet_cells":100000,"run_cost":"one","rows_first":2000,"rows_last":500,"rows_between":2000,"halvings":0,"cell_chars":16384,"cell_head_chars":4096},"cells_cut":0,"cells_raw":0,"read":"whole","date_system":"1900"}

{"sheet":"Topic Area 2 Application Data","index":0,"n_rows":99,"n_cols":7,"rows_kept":99,"cut":false,"hidden":false,"merged":[[6,0,6,6],[7,4,7,5]]}
["Topic Area 2 Application data ONLY"]
["PROJECT TITLE::","Insert Title"]
["EVALUATION DATE::","Insert Date populated"]
["PROPRIETARY/BUSINESS SENSITIVE"]
[]
[]
["TECHNICAL DATA INPUTS"]
["Instructions  READ!!!!","Cells Highlighted in Yellow are required for the FOA application. Specific instructions are provided in column D for the associated highlighted parameter. The  PARAMETERS not highlighted will be tailored to the specific technology and will be required if the project is selected.  ","Use suggested units when possible, otherwise change units to match your data.","This column is used to provide extra information about the parameter","Under the \"Baseline or Best Available Data\" heading, populate with  the  value achieved to date that is the most representative of the current state of technology based on actual operating data.  If no operational data is available, please provide best available data and the associated design basis.  Use the \"Basis/Justification\"  column to define how data were generated and the associated design basis (simulation, lab, pilot, etc.).  Provide project targets values for key parameters in the   Targets\" column.",null,"Use this column to briefly describe the basis or justification for the  accompanying performance metrics. Provide the scale and other relevant parameters describing how the data were generated.   Examples of basis include: performance tests, integrated pilot data, PDU data, lab data, etc. Include number of hours at steady state or the results of a number of replicate short runs of the isolated process step, etc. Include how the measurement was made (e.g. analysis of the gasifier outlet stream using gas chromatography).  If multiple parameters use the same basis, you may reference a footnote that describes the basis rather than repeat the basis."]
["Section","Parameter","Units","Parameter Specific Instructions","Baseline or Best Available Data","Target value for project","Basis/Justification**"]
["Biology Metrics","Examples of Advanced Biology Metrics are listed below please add your project specific metrics:"]
[null,"Transformation method","Provide brief description in basis column"]
[null,"Define Pathway Targets","Provide brief description in basis column"]
[null,"Starting Strain","Provide brief description in basis column"]
[null,"Improvement compared to baseline Strain","Provide brief description in basis column"]
["Algae Cultivation","Cultivation/Pond System Design & Description","Provide brief description in basis column"]
[null,"Culture surface area","m2"]
[null,"Culture depth (or width of PBR)","cm, control SetPoint"]
[null,"Culture volume","L"]
[null,"Longest continuous cultivation of baseline strain","days"]
[null,"Why was the cultivation test stopped","Brief Description in Basis column"]
["Nutrient","Nitrogen Chemical Source"]
[null,"Phosphorus Chemical Source"]
[null,"Trace Metals Source"]
[null,"Add rows to insert other Nutrient sources …"]
[null,"Add Nutrient Source here…"]
["CO2","CO2 source","Brief Description in Basis column"]
[null,"CO2 purity ","wt.(%)"]
[null,"CO2 delivery method","Brief Description in Basis column"]
[null,"CO2 Input","kg_CO2/kg_AFDW_algae"]
[null,"CO2 utilization ","%","Calculation should be based on AFDW of algae carbon. Use the basis/justification column to describe data basis and calculation used."]
[null,"Carbon Efficiency within Cultivation System","g_carbon_afdw_algae / g_carbon_Input","Mass balanced based on AFDW of algae carbon and carbon input. Use basis/justification column to define the data basis and scale used for mass balance.  "]
["Productivity ","Peak Productivity (insert months and duration in basis column)","g-AFDW/m2/day","Use the basis/justification column to describe the conditions used to generate the peak productivity value. Describe if the test was done outdoors and at what scale. Provide the timeframe and duration of the test "]
[null,"Average Productivity,(insert months and duration in basis column) ","g-AFDW/m2/day","Provide the same information as above in addition to how the average productivity was calculated"]
[null,"Annual Productivity  (measured if applicable)","g-AFDW/m2/day - Measured ","If you have actual annual data provide it here and populate the basis/justification column - otherwise fill out row 34"]
[null,"Annual Productivity (calculated)","g-AFDW/m2/day","Fill out this row ONLY if you do not have actual annual productivity data. Provide how the value was calculated and what data and scale were used for the calculation in the basis/Justification column"]
["Algae Characteristics","Algae Energy content  (dry basis)","LHV/kg"]
[null,"Moisture after harvesting","%"]
[null,"Algae Lipid Content","wt. % (g/g_algae biomass)","Use basis/justification column to define the data basis and scale used for the analysis and what analysis method was used"]
[null,"Ash content  (dry basis)","wt. % (g/g_algae biomass)"]
[null,"Protein","wt. % (g/g_algae biomass)"]
[null,"Carbohydrates","wt. % (g/g_algae biomass)"]
[null,"C (dry basis)","wt. %"]
[null,"H (dry basis)","wt. %"]
[null,"N (dry basis)","wt. %"]
[null,"O (dry basis)","wt. %"]
[null,"S (dry basis)","wt. %"]
["Algae Biomass Conversion ","Brief Process Description of Algae Biomass Conversion Technology","Brief Description in Basis column"]
["Fuel Product(s)  ","Main fuel product","Provide a brief description for the main fuel product in column E and F","Use the rows below if more than one fuel product is produced. List all fuel products here. Add rows if required"]
[null,"Other fuel product ","2nd Fuel Product"]
[null,"Add rows to list additional fuel products","3rd Fuel Product"]
["BioProduct(s)","Identify and list all BioProduct(s) below",null,"Populate all applicable highlighted rows and use the basis/justification to provide more information if required"]
["Product 1","BioProduct 1  Name","Name"]
[null,"BioProduct  Percent of total mass produced","wt. %"]
[null,"BioProduct  value","$/kg"]
[null,"BioProduct  end use and target market","Brief Description in Basis column"]
[null,"BioProduct  existing  and/or estimated new market size","kg"]
["Product 2","BioProduct 2  Name","Name"]
[null,"BioProduct  Percent of total mass produced","wt. %"]
[null,"BioProduct  value","$/kg"]
[null,"BioProduct  end use and target market","Brief Description in Basis column"]
[null,"BioProduct  existing  and/or estimated new market size","kg"]
["Other Products","Add additional rows for more products if required"]
["Biomass Conversion Process Yield","Provide the yield(s) from Algae Biomass below  ",null,"Yields should be based  the ash free dry weight (AFDW) of biomass in metric tons. Add rows if required for additional fuel or BioProducts "]
[null,"--Bio Fuel Yield","gal/MT (AFDW)","Use the basis/justification column to describe the data basis and scale used to calculate the yields. Provide a brief  summary of assumptions used in calculations"]
[null,"--Bio Fuel Yield","gal/MT (AFDW)","\""]
[null,"--BioProduct(s)/Fuel(s)","kg/MT (AFDW)","\""]
[null,"--BioProduct(s)/Fuel(s)","kg/MT (AFDW)","\""]
[null,"--BioProduct(s)/Fuel(s)","kg/MT (AFDW)","\""]
["Overall Process Yields","Overall Algal Oil Yield ","gal_Algal_oil/acre/yr.","Provide the total volumetric yield of the algal oil produced. Use the basis/justification column to describe the data basis and scale used to calculate the yields. Provide a brief  summary of assumptions used in calculations"]
[null,"Overall Liquid Fuel Yield","gal/acre/yr.","Provide the volumetric yield for total liquid fuels generated. Use the basis/justification column to describe the data basis and scale used to calculate the yields. If more than one liquid fuel is produced provide the percent for each component in the basis/justification column"]
[null,"--BioProduct(s)","appropriate unit (mass/vol)/acre/yr.","Provide the BioProduct(s) yield(s) on a acer per year basis using the appropriate volume (gal) or weight (kg, tons) units. Also provide the basis and scale used to calculate yields"]
[null,"--BioProduct(s) ","appropriate unit (mass/vol)/acre/yr.","See above"]
["Energy Return on Investment","Energy Return on Investment (Total Usable Energy out / Total Energy Input)","Ratio","Provide the data basis and methodology used to calculate the total usable energy out divided by the total energy put into the system"]
["Algae Cultivation / Production Economics Estimated for First Commercial based on Baseline Yields (Column D) and Targets (Column E)"]
["Economics ","Expected Commercial Plant Location","City, State, Country"]
[null,"Expected Plant Operation Date","Year"]
[null,"Estimated Plant Capacity Based on Demonstrated Productivities and Yields and Commercial Targets","Algal Biomass BDMT per Year"]
[null,"Commercial Plant Acreage","acres"]
[null,"Total Cultivation and Harvesting Capital Investment","MM$"]
[null,"Algae Production Cost (including cost of capital)","$/BDMT"]
[]
[]
["Algae Biomass Conversion Economics Estimated for First Commercial based on Demonstrated Yields (Column D) and Commercial Targets (Column E)"]
["Economics ","Expected Commercial Plant Location","City, State, Country"]
[null,"Expected Plant Operation Date","Year"]
[null,"Commercial Plant Feedstock Design Capacity","BDMT/day"]
[null,"Estimated Plant Capacity Based on Demonstrated Yields and Commercial Target Yields","MMGGE/yr."]
[null,"Feedstock Price","$/BDMT"]
[null,"Total Capital Investment","MM$"]
[null,"Total production cost (including Cost of Capital)","$/gge"]
["Sustainability Metrics for the entire process (algae cultivation and conversion to fuels/products)  Estimated to Commercial based on Demonstrated yields ( Column D) and Commercial Targets (Column E)"]
["Sustainability Metrics ","lifecycle (well-to-wheels) GHG emissions using GREET or comparable tool","kg CO2-eq/gge"]
[null,"Conversion (GTG) GHG Emissions","kg CO2-eq/gge"]
[null,"Fossil Energy Usage (Gate-To-Gate) ","MMBTU/gge"]
[null,"Grid Power Consumption ","kWhr/gge"]
[null,"Water withdrawal (water input from surface or ground water)","gal/gge"]
[null,"Water consumption ","gal/gge","Note: Net water consumed during the biorefinery operation. Measure of water loss through evaporation and drifting in cooling and boiling, and incorporating into products and coproducts in process operation within biorefinery boundary. The water consumption would be equal to water withdrawal when there is zero wastewater discharge in a biorefinery."]
[null,"Wastewater generation (discharge from system)","gal/gge"]
[null,"Solid Waste ","kg/gge"]

{"sheet":"Topic Area 1 Application Data","index":1,"n_rows":87,"n_cols":7,"rows_kept":87,"cut":false,"hidden":false,"merged":[[6,0,6,6],[7,4,7,5]]}
["Topic Area 1 Application data ONLY"]
["PROJECT TITLE::","Insert Title"]
["EVALUATION DATE::","Insert Date populated"]
["PROPRIETARY/BUSINESS SENSITIVE"]
[]
[]
["TECHNICAL DATA INPUTS"]
["Instructions  READ!!!!","Cells Highlighted in Yellow are required for the FOA application. Other cells are optional but are indicative of the information that will be requested during the course of the post-award validation.  Specific instructions are provided in column D for the associated highlighted parameter. The  PARAMETERS not highlighted will be tailored to the specific technology and will be required if the project is selected.  ","Use suggested units when possible, otherwise change units to match your data.","This column is used to provide extra information about the parameter","Under the \"Baseline or Best Available Data\" heading, populate with  the  value achieved to date that is the most representative of the current state of technology based on actual operating data.  If no operational data is available, please provide best available data and the associated design basis.  Use the \"Basis/Justification\"  column to define how data were generated and the associated design basis (simulation, lab, pilot, etc.).  Provide project targets values for key parameters in the   Targets\" column.",null,"Use this column to briefly describe the basis or justification for the  accompanying performance metrics. Provide the scale and other relevant parameters describing how the data were generated.   Examples of basis include: performance tests, integrated pilot data, PDU data, lab data, etc. Include number of hours at steady state or the results of a number of replicate short runs of the isolated process step, etc. Include how the measurement was made (e.g. analysis of the gasifier outlet stream using gas chromatography).  If multiple parameters use the same basis, you may reference a footnote that describes the basis rather than repeat the basis."]
["Section","Parameter","Units","Parameter Specific Instructions","Baseline or Best Available Data","Target value for project","Basis/Justification**"]
["Biology Metrics","Examples of Advanced Biology Metrics are listed below please add your project specific metrics:"]
[null,"Starting Strain","Provide brief description in basis column"]
[null,"Improvement compared to baseline Strain","Provide brief description in basis column"]
["Algae Cultivation","Cultivation/Pond System Design & Description","Provide brief description in basis column"]
[null,"Culture surface area","m2"]
[null,"Culture depth (or width of PBR)","cm, control SetPoint"]
[null,"Culture volume","L"]
[null,"Why was the cultivation test stopped","Brief Description in Basis column"]
["Nutrient","Nitrogen Chemical Source"]
[null,"Phosphorus Chemical Source"]
[null,"Trace Metals Source"]
[null,"Add rows to insert other Nutrient sources …"]
["CO2","CO2 source","Brief Description in Basis column"]
[null,"CO2 purity ","wt.(%)"]
[null,"CO2 delivery method","Brief Description in Basis column"]
[null,"CO2 utilization ","%","Calculation should be based on AFDW of algae carbon. Use the basis/justification column to describe data basis and calculation used."]
[null,"Carbon Efficiency within Cultivation System","g_carbon_afdw_algae / g_carbon_Input","Mass balanced based on AFDW of algae carbon and carbon input. Use basis/justification column to define the data basis and scale used for mass balance.  "]
["Productivity ","Peak Productivity (insert months and duration in basis column)","g-AFDW/m2/day","Use the basis/justification column to describe the conditions used to generate the peak productivity value. Describe if the test was done outdoors and at what scale. Provide the timeframe and duration of the test "]
[null,"Average Productivity,(insert months and duration in basis column) ","g-AFDW/m2/day","Provide the same information as above in addition to how the average productivity was calculated"]
[null,"Annual Productivity  (measured if applicable)","g-AFDW/m2/day - Measured ","If you have actual annual data provide it here and populate the basis/justification column - otherwise fill out row 34"]
[null,"Annual Productivity (calculated)","g-AFDW/m2/day","Fill out this row ONLY if you do not have actual annual productivity data. Provide how the value was calculated and what data and scale were used for the calculation in the basis/Justification column"]
["Algae Characteristics","Algae Energy content  (dry basis)","LHV/kg"]
[null,"Moisture after harvesting","%"]
[null,"Algae Lipid Content","wt. % (g/g_algae biomass)","Use basis/justification column to define the data basis and scale used for the analysis and what analysis method was used"]
[null,"Ash content  (dry basis)","wt. % (g/g_algae biomass)"]
[null,"Protein","wt. % (g/g_algae biomass)"]
[null,"Carbohydrates","wt. % (g/g_algae biomass)"]
[null,"C (dry basis)","wt. %"]
[null,"H (dry basis)","wt. %"]
[null,"N (dry basis)","wt. %"]
[null,"O (dry basis)","wt. %"]
[null,"S (dry basis)","wt. %"]
["Fuel Product(s)  ","Main fuel product","Provide a brief description for the main fuel product in column E and F","Use the rows below if more than one fuel product is produced. List all fuel products here. Add rows if required"]
[null,"Other fuel product ","2nd Fuel Product"]
[null,"Add rows to list additional fuel products","3rd Fuel Product"]
["BioProduct(s)","Identify and list all BioProduct(s) below",null,"Populate all applicable highlighted rows and use the basis/justification to provide more information if required"]
["Product 1","BioProduct 1  Name","Name"]
[null,"BioProduct  Percent of total mass produced","wt. %"]
[null,"BioProduct  value","$/kg"]
[null,"BioProduct  end use and target market","Brief Description in Basis column"]
[null,"BioProduct  existing  and/or estimated new market size","kg"]
["Product 2","Repeat as necessary"]
["Biomass Conversion Process Yield","Provide the yield(s) from Algae Biomass below  ",null,"Yields should be based  the ash free dry weight (AFDW) of biomass in metric tons. Add rows if required for additional fuel or BioProducts "]
[null,"--Bio Fuel Yield","gal/MT (AFDW)","Use the basis/justification column to describe the data basis and scale used to calculate the yields. Provide a brief  summary of assumptions used in calculations"]
[null,"--Bio Fuel Yield","gal/MT (AFDW)","\""]
[null,"--BioProduct(s)/Fuel(s)","kg/MT (AFDW)","\""]
[null,"--BioProduct(s)/Fuel(s)","kg/MT (AFDW)","\""]
[null,"--BioProduct(s)/Fuel(s)","kg/MT (AFDW)","\""]
["Overall Process Yields","Overall Algal Oil Yield ","gal_Algal_oil/acre/yr.","Provide the total volumetric yield of the algal oil produced. Use the basis/justification column to describe the data basis and scale used to calculate the yields. Provide a brief  summary of assumptions used in calculations"]
[null,"Overall Liquid Fuel Yield","gal/acre/yr.","Provide the volumetric yield for total liquid fuels generated. Use the basis/justification column to describe the data basis and scale used to calculate the yields. If more than one liquid fuel is produced provide the percent for each component in the basis/justification column"]
[null,"--BioProduct(s)","appropriate unit (mass or volume)/acre/yr.","Provide the BioProduct(s) yield(s) on a acer per year basis using the appropriate volume (gal) or weight (kg, tons) units. Also provide the basis and scale used to calculate yields"]
["Energy Return on Investment","Energy Return on Investment (Total Usable Energy out / Total Energy Input)","Ratio","Provide the data basis and methodology used to calculate the total usable energy out divided by the total energy put into the system"]
["Algae Cultivation / Production Economics Estimated for First Commercial based on Baseline Yields (Column D) and Targets (Column E)"]
["Economics ","Expected Commercial Plant Location","City, State, Country"]
[null,"Expected Plant Operation Date","Year"]
[null,"Estimated Plant Capacity Based on Demonstrated Productivities and Yields and Commercial Targets","Algal Biomass BDMT per Year"]
[null,"Commercial Plant Acreage","acres"]
[null,"Total Cultivation and Harvesting Capital Investment","MM$"]
[null,"Algae Production Cost (including cost of capital)","$/BDMT"]
[]
[]
["Algae Biomass Conversion Economics Estimated for First Commercial based on Demonstrated Yields (Column D) and Commercial Targets (Column E)"]
["Economics ","Expected Commercial Plant Location","City, State, Country"]
[null,"Expected Plant Operation Date","Year"]
[null,"Commercial Plant Feedstock Design Capacity","BDMT/day"]
[null,"Estimated Plant Capacity Based on Demonstrated Yields and Commercial Target Yields","MMGGE/yr."]
[null,"Feedstock Price","$/BDMT"]
[null,"Total Capital Investment","MM$"]
[null,"Total production cost (including Cost of Capital)","$/gge"]
["Sustainability Metrics for the entire process (algae cultivation and conversion to fuels/products)  Estimated to Commercial based on Demonstrated yields ( Column D) and Commercial Targets (Column E)"]
["Sustainability Metrics ","lifecycle (well-to-wheels) GHG emissions using GREET or comparable tool","kg CO2-eq/gge"]
[null,"Conversion (GTG) GHG Emissions","kg CO2-eq/gge"]
[null,"Fossil Energy Usage (Gate-To-Gate) ","MMBTU/gge"]
[null,"Grid Power Consumption ","kWhr/gge"]
[null,"Water withdrawal (water input from surface or ground water)","gal/gge"]
[null,"Water consumption ","gal/gge","Note: Net water consumed during the biorefinery operation. Measure of water loss through evaporation and drifting in cooling and boiling, and incorporating into products and coproducts in process operation within biorefinery boundary. The water consumption would be equal to water withdrawal when there is zero wastewater discharge in a biorefinery."]
[null,"Wastewater generation (discharge from system)","gal/gge"]
[null,"Solid Waste ","kg/gge"]

{"sheet":"Block Flow if Applicable","index":2,"n_rows":16,"n_cols":2,"rows_kept":16,"cut":false,"hidden":false,"merged":[]}
[null,"Instructions"]
[null,"Provide a Blow Flow Diagram for the envisioned commercial facility below"]
[null,"Insert a brief process description below"]
[null,"Identify/Highlight areas with recycle streams and other integration points"]
[null,"If possible quantity the mass  and energy flow rates of the major streams in the block flow diagram "]
[]
[]
[null,"Insert Process Description Here : "]
{"$rows_empty":7}
[null,"Insert Block Flow Diagram Here: "]